Introduction of Concrete Construction Tools for Construction Sites
Here, In this article, we have listed the concrete construction tools which are generally used on the construction sites with their uses.
- 81 Nos of List Use Construction Tools and Pieces of Equipment
- 16 Definition Related for Plastering Work | Tools For Plastering | Preparation of Background for Plastering
Construction Tools Used for Mixing of Concrete
1. Concrete Mixers
Nowadays, a concrete mixer which is a mechanical machine is used for the manufacturing of concrete on site. A concrete mixer is a machine that is used on the construction site to homogeneously mix cement, sand, aggregate, and water in the right proportion to form concrete.
Concrete mixture is classified into two categories.
1.1. Batch Mixer
A batch mixture is a type of mixture that produces concrete one batch at a time. Batch mixers are commonly used concrete mixers on small and medium-sized construction sites.
1.2. Continuous Mixer
Continuous mixers are the type of concrete mixers which work without any interruption and continuously produce concrete. These types of concrete mixers are suitable for large-scale construction sites where concrete is required in bulk quantity at a continuous rate. This type of big structure such as dams, bridges, and tunnels, etc.
Uses of Concrete mixer: The concrete mixer is used for mixing various components such as cement, sand, aggregate, and water to form the concrete of desired quality.
A Wheelbarrow is basically a small hand-driven vehicle that is designed in such a way that it has only one wheel. It has two handles at its rear side so that a person can handle it from one place to another place. It is designed in such a way that it will distribute the total load between the wheel and the person handling it. The wheelbarrow enables too quickly to transport heavy-weight luggage.
3. Shovel Saws
It is basically a tool that is used for digging, lifting, and moving the material on the construction site. Most of the shovels are hand tools which consist of a broad blade. Hand shovel blades are made of steel. The shovels are also known as power shovels which are the bigger size excavation machines on this construction site for the purpose of digging and lifting the material.
Uses of shovel saws: The shovel saws are used on the construction sites for the purpose of digging, lifting, and moving the material.
5. Concrete Vibrator
A vibrator is a machine that is used on the construction site for removing air voids from the concrete. A vibrator machine is used for compacting concrete. There are various types of concrete vibrators machines are used which are as follows
- Internal or needle vibrator machine
- External vibrator machine
- Surface vibrator machine
- Table vibrator machine
6. Rubber Boot
Rubber Boots are important safety wears that are used on construction sites for the Safety of the labors from harsh substances. Nowadays it is necessary that the labours should wear rubber boots while working on the construction sites.
It provides a barrier between the feet and the dangerous substances which are present on the site while working. During the construction, it is not possible to work on the muddy surface, whereas the rubber boots allow the labours to work effectively.
Uses of Rubber Boots: Rubber Boots provide safety from harsh substances like acid, chemicals while working on the construction site.
Gloves are also safety wears that are used on the construction site. It provides safety from dangerous substances such as acid, fire or iron pins, etc. Gloves help to protect the hands from the cold or heat.
Uses of Gloves: Gloves provide safety to the hands while working on the construction site.
8. Tape Measure
A tape measure is a flexible ruler which is used for measuring the distance between two points. It is an important tool used on the construction site.
This is a tool that consists of a tough blade and wire with a hard edge. There are different types of saws such as the hand saw which has relatively a thick blade.
10. Kneeling Board
The concrete kneeling board is a finishing tool that is used on the construction site for concrete Finishing.
Use of Kneeling Boards:- The kneeling board is used to finish the surface of the concrete. It helps to provide a smooth surface.
Construction Tools Used for Finishing of Concrete
|Sr.No.||Construction Tools for Finishing of Concrete||Tools Pictures||Tools Description|
|1||Trowel||A trowel is also a finishing tool that is used to smooth the surface of the concrete. There are different types of trowels are available for different types of concrete work.|
|2||Edger||It is a tool that is used to round exposed edges of the concrete for providing a smooth finish to the concrete.|
|3||Broom||Broom finish is the traditional type of finish that is used for Finishing of the concrete. Broom is used to give the final rough finish to the concrete.|
|4||Groove Cutter||Groove cutter is known as the concrete cutter. Groove cutter is used to cut grooves in the RCC roads. It is generally used for cutting the wet and dry cutting of concrete floors.|
Construction Tools Used for Testing of the Concrete
|Sr.No.||Construction Tools Used for Testing of the Concrete||Tools Pictures||Tools Description|
|1||Concrete Moisture Metre||This is the instrument which is used to determine the water content in the concrete. It will give the precise result of the moisture present in the concrete.|
|2||Relative Humidity Test Kit||The relative humidity test kit is used for an accurate indication of the internal moisture of the slab. It will helps to provide necessary moisture data for concrete and flooring.|
|3||Thermo- Hygrometer||Temperature plays a very important role during construction. This instrument is used for monitoring both temperature and relative humidity on the construction site.|
|4||Digital CTM Machine||The Compression Testing Machine is a very common testing method that is used to establish the compressive force or crush resistance of a material and the ability of the material to recover after a specified compressive force is applied and even held over a defined period of time by measuring fundamental variables, such as, strain, stress, and deformation.|