Grillage Foundation | Types of Grillage Foundation | Features of Grillage Foundation

Grillage Foundation

A foundation consisting of one, two or more layers of beams (typically steel) superimposed on a concrete layer to disperse the load over a large area is a foundation for grilling.

It is used at the base of the columns. These layers are wrapped in concrete and are at right angles to each other. This type of foundation is generally used for pillars and column scaffolds with a heavy structure.

Although the foundation and the grid look the same, they are different. Where the foundation transfers the load from the structure to the ground, the grid disperses heavy loads over large areas.

Also, read: Piling for Foundation | Use of Pile Foundation | Characteristics of Pile Foundation

Types of Grillage Foundation

According to the materials used in the construction, the Grillage foundation is of two types:

  • Steel Grillage Foundation
  • Timber grill foundation

Steel Grillage Foundation

The Steel Grillage foundation consists of joints or steel beams supplied in single or double layers. Its name defines its function and structure, as it is composed of steel beams, structurally known as rolled steel beams.

A minimum coverage of 10 cm is maintained on the outer sides of the outer beams, as well as above the upper flanges of the upper layer.

The depth of the concrete must be at least 15 cm. After leveling the base and pouring the concrete, we must check that the compaction is done properly and that an impermeable layer of a thickness of not less than 15 cm is formed.

It protects steel beams from groundwater, which can lead to corrosion. Then, we place the first layer of beams on the concrete bed at a distance of 100 to 300 mm, with the help of tube separators.

Then, we pour concrete between and around the beams of the first layer. After that, we place the second beam level at right angles to the first levels with the help of the separator.

Then again, we pour concrete between and around the steel beams. In doing so, we connect the steel supports to the top layer with the help of a base plate, side angles, and a reinforcement plate.

These connecting elements are also embedded in the concrete to make the joint rigid.

Also, read: Difference Between Footing and Foundation | What is Footing and Foundation

Timber Grillage Foundation

The timber-type foundation is provided for masonry walls heavily loaded with Timber columns.

This foundation is especially useful in flooded areas, where the carrying capacity of the soil is very low and where the load on the soil is limited to 50-60 KN/M2.

Timber planks and Timber beams are used instead of steel beams. there is no concrete enclosed between the Timber joints.

However, the lower concrete supplied in the steel grid is replaced by a Timber platform built with Timber planks.

The excavation of the base is level. The bottom layer of Timber boards of size 20 to 30 cm and width of 5 to 7.5 cm thick is placed side by side, with no space between them.

Above this layer, a Timber beam of the same section as that of the Timber post is placed at a right angle.

Then, another layer of planks is placed again at right angles to the direction of the beams. The top layer of boards maybe 7.5-10 cm. Thick, extending the entire width of the base of the wall, on which the masonry wall is built.

Also, read: What Is Raft Foundation | Type of Footing | Detail of Raft Footing

Grillage Foundation Project

For the grating foundation project, it is necessary to calculate the loads and moments of the superstructure.

From this, we need to determine the base area required for an adequate allowable ground bearing pressure of the condition.

Dividing this area, we will find the numbers and the size of each grid layer. Next, we have to design the layer so that it slopes from the edge of the layer above.

It will determine the beam sizes needed to withstand bending moments and shear forces.

The grid cannot be enclosed in concrete and in order, as the composite action of the beam and concrete will be demoralized. The method of construction and loading must be compatible with the needs of the project

Also, read:  H-Beam vs I-Beam | What Is H-Beam | What is I-Beam

Features of Grillage Foundation

The grill connects the entire foundation to the single structure and thus contributes to an even distribution of the weight of the house and all the piles.

Most of the time, this foundation is organized as a monolithic reinforced concrete structure. The resistance is provided by the metallic structure (steel foundation for grilling).

Installation of the Grillage Foundation

The steps for installing the foundation for grilling are shown below:

  • First, for the solid monolithic grid, we need to produce and install the structure. We prefer this barbecue because it is more reliable.
  • The formwork is made of edge boards in the form of rectangular gutters. Its height is 1 foot and width is equal to the minimum thickness of the house wall. A space of about 15 to 30 cm should be defined between each grid.
  • Within the formwork, we have to define a reinforcement connection structure using the connecting wire. The shortest distance from the structure next to the formwork must be the same.
  • Then, the reinforcement is connected to the same connecting wire used previously.
  • Then, the concrete must be prepared with the cement mixer. It is poured into the formwork in a continuous cycle. The connections must be placed at a height of about 25 to 30 mm so that they are completely immersed in the concrete. Concrete must be poured with care to avoid unwanted cavities. 6. After filling the surface, it should be leveled and left to dry. When dry, the formwork can be removed. The foundation is ready now.

Advantages of the Grillage Foundation

  • It requires less time and materials for installation;
  • It reduces the evocation of heat from the house with the help of the foundation, since it is not applied to frozen soil
  • It reduces the vibration level of the house (it is very real if the house is built close to highways).

Disadvantages of the Grillage Foundation

  • It requires the need to build piles at a sufficiently large depth;
  • the space under the grid must be filled and heated.

Like this post? Share it with your friends!

Suggested Read-

Krunal Rajput: Hey, I am Krunal Rajput. The Man Behind CivilJungle. I started this site to spread knowledge about Civil/Mechanical/Electrical Engineering. I am a Degree Holder in Civil Engineering.