What Is Dampness?
The most common source of dampness is due to the capillary attraction of sub-soil water in the foundation and walls of the building.
Water can penetrate the masonry through faulty sills, bad workmanship, etc. and hence in buildings, a layer of water repellent material called damp proof course (DPC) is introduced, which acts as a barrier against the capillary rise of water.
Requirements of an Ideal Material for Damp-Proofing
Following are the requirements of an ideal material for damp-proofing:
• The material should be durable.
• The material should be dimensionally stable.
• The material should be reasonably cheap.
• The material should be free from sulfates, chlorides, and nitrates.
• The material should be such that it remains steady and does not allow any movement n itself.
• The material should be perfectly impervious.
• The material should be capable of resisting safely the loads coming on it.
• The material should be flexible so that it can adjust the structural movements without any fracture.
Materials Used for Damp-Proofing
Following are the materials which are commonly used for the damp-proofing:
• Hot Bitumen
• Mastic Asphalt
• Bituminous Felts
• Metal Sheets
• Combination of Sheets and Felts
• Mortar The mortar
• Cement Concrete
• Plastic Sheets
This is a flexible material and is placed on the bed of concrete or mortar. This material should be applied with a minimum thickness of 3 mm.
This is a semi-rigid material, and it forms an excellent impervious layer for damp-proofing. The asphalt is a very durable and completely impervious material.
It can withstand only very slight distortion. It is liable to squeeze out in very hot climates or under very heavy pressure.
This is a flexible material. It is easy to lay and is available n rolls of normal wall width. It is laid on a layer of cement mortar.
An overlap of 100 mm is provided at the joints, and full overlap is provided at all corners. The laps may be sealed with bitumen, if necessary.
The bitumen felt can accommodate slight movements. But it is liable to squeeze out under heavy pressure, and it offers little resistance to sliding.
The material is available in rolls, and it should be carefully unrolled, especially in cold weather.
The sheets of lead, copper, and aluminum can be used as the membranes of damp-proofing. The lead is a flexible material.
The thickness of lead sheets should be such that its weight is not less than 200 N/m2. The lead can be dressed to complex shapes without fracture, and it possessed high resistance to sliding action.
It is impervious to moisture, and it does not squeeze out under ordinary pressure. It resists ordinary atmospheric corrosion.
The surfaces of lead coming in contact by a coating of bitumen or of bitumen paint of high consistency. The copper is a flexible material.
It possesses a higher tensile strength than that of lead. It is impervious to moisture, and it does not squeeze out under ordinary pressure.
It possesses high resistance to sliding action. The external walls, especially of stones, are likely to be stained when a damp-proof course of copper is adopted.
The surface of copper coming Ja contact with mortars are likely to be affected. But, for normal use, the metal does not require any protective coating.
The aluminum sheets can also be used for damp-proofing. But they should be protected with a layer of bitumen.
Combination of Sheets and Felts
A lead foil is sandwiched between asphalt or bituminous felt. This is known as the lead core, and it is found to be economical, durable, and efficient.
The two courses of sound and dense stones such as granites, slates, etc. laid in cement mortar with vertical breaking joints can work as an effective damp-proofing course.
The stones should extend for full width of the wall. Sometimes the stones can be fixed as .n case of a roof surface, on the exposed faces of the wall, etc.
The dense bricks, absorbing water less than 4.50% of their weight, can be used for damp-proofing at places where the dampness is not excessive.
The joints are kept open. Such bricks are widely used when a damp-proofing course is to be inserted in an existing wall.
For plastering work, the water-proof mortar can be prepared. It is prepared by mixing 1 part of cement, 2 part of sand and pulverized alum at the rate of 120 N / m3 of sand.
In the water to be used, 0.75 N of soft soap is dissolved per liter of water, and this soap water is then added to the dry mix. The mortar thus prepared is used to plaster the surface.
Alternatively, some patented water-proofing material such as Pudlo, Cido, Dempro, etc. may be added to the cement mortar.
A cement concrete layer in the proportion 1: 2: 4 is generally provided at the plinth level to work as a damp-proofing course.
The depth of cement concrete layer varies from 40 mm to 150 mm. It stops the rise of water by capillary action, and it is found to be effective at places where the dampness is not excessive.
The material is made of black polythene, having a thickness of about 0.50 mm to 1 mm with the usual width of wall, and it is available in roll lengths of 30 m. this treatment is relatively cheap, but it is not permanent.
Like this post? Share it with your friends!
Suggested Read –
- West Point Bridge Designer
- What Is Plaster | Type of Plaster | Defects In Plastering
- Introduction of USCS | USCS Classifies Soils into Two Broad Categories
- Introduction of Gantry Girder | Load on Gantry Gutter | Type of Load on Gantry Gutter
- What Is Pier Foundation | Types of Drilled Piers | Advantages and Disadvantages of Drilled Pier Foundations