What Is a Measuring Tape?
A measuring tape is a loose tool utilized for measuring length. It is fiberglass, cloth, plastic, metal ribbon, or stripe.
So, it is a type of elastic ruler correspondingly apprehended as a tape measurement. It is observed in centimeters and inches.
Markings on a Measuring Tape
The measuring tape demonstrates observing in two distinct units—centimeters and inches.
Division Markings in Centimeters
10 millimeters assemble 1 centimeter, so there are 10 divisions between each cm.
Each small division is equal to 1 mm.
The 1st small mark after the 5 cm marking symbolizes a size of 51 mm, which can guide to 5.1 cm.
Division Markings in Inches
The large numbers, 1, 2, 3…, distinguished next to the elongate markings, exemplify entire inches.
Between these numbers are small companies that exemplify fractions of an inch.
Since 12 inches complete 1 foot, there is a ‘foot’ maintained after every 12 inches.
Useful Article for You
- How Much Does a Yard of Concrete Weigh
- How Tall Is a Door
- How Many Stairs in a Flight
- How Many Bags of Concrete in a Yard
- How to Get Burnt Smell Out of Microwave
- How Far Apart Should Fence Posts Be
- How Are Bridges Built Over Water
- How Many People Died Building the Great Wall of China
- How to Draw House
- How to Build a Lean to Roof
- How Many Bags of Concrete for 1 Yard
- How Much Does Cinder Block Cost
- How to Get a House for Free
- How Much Does It Cost to Soundproof a Room
- How to Read a Measuring Tape in Meters
- How to Mount a TV on a Brick Wall
- How Many Brick Are in a Cube
- How Is Transported Soil Different from Residual Soil
- How to Use Washers
- How to Get Property for Free
- How Is Tar Made
- How Much Does Gallon of Water Weight?
- How Many Tiles Do I Need?
- How Much Does It Cost to Build a Pergola?
- How Much Does a Concrete Slab Cost?
- How Much Does a Yard of Gravel Weigh?
- How Many Shingles Do I Need for a 24×24 Garage?
- How to Remove Paint from Concrete Without Chemicals
- How to Cover Concrete Walls in Basement
- How to Find Wall load
- How to Build a Cavity Wall
- How Much Does a Heated Driveway Cost
- How Much Spray Foam Do I Need
- How to Get Blood Out of Carpet
- How to Mix Concrete
- How to Find the Contour Interval
- How to Identify Zero Force Members
- How To Install A Welded Wire Fence
- How to Tell If a Wall Is Load Bearing
- How to Replace Outdoor Faucet
How To Read Measure Tape?
The humble tape size is the globe’s most commonly utilized measuring tool, regarding millions of tradesmen and contractors perform every day.
While the seasoned professionals amongst you will be fully aware of how to read the additional markings on your tape, there will be amateurs, specialists, or those just beginning in their professions who aren’t yet acquainted.
We regularly question, “how accomplish you read a tape measurement .”Accordingly, in reaction to our customers, we’ve arranged together this simple principle that clarifies merely that!
How to Read a Measuring Tape in Inches?
While Britain officially manages a metric system of dimensions nowadays, our nation, regardless, detects an interesting mix of metric and imperial measurements utilized daily.
We tally our measurement in feet and inches, our weight in stones and pounds, and our acceleration in miles per hour.
Despite this, all 21st Century technical, engineering or construction evaluation are noted in millimeters.
Consequently, most manufacturers have opted to produce UK-spec tape measurements with metric and imperial graduations.
When conducting the graph overhead, you’ll notice a sequence of large numbers marked 1, 2, 3, and 4.
These numbers pose after symbolic vertical marks, which exemplify entire inches. Position entirely 1 = 1″, 2 = 2″ and so on.
Between those numbers is a succession of shorter approaches characterizing fractions of an inch.
Nowadays, the mark in the middle of the inch symbolizes a measurement of 1/2″ while the markings on either side specify standards of 1/4″ and 3/4″ respectively.
Slight marks then depict 1/8ths and 1/16ths (marked in red) of an inch.
A 16ft tape measure, for sample, will include sixteen one-foot marks along with its measure and 192 one-inch practices (12 inches per foot).
Each inch will retain eight 1/8th of an inch and sixteen 1/16th of inch marks.
- 1 foot = 12 inches
- 1 inch = 16 x 1/16th of an inch, 8 x 1/8th of an inch
How to Read a Measuring Tape in Meters?
Meters are parts of the metric system. You don’t select to read the imperial measures, so explore the metric side.
The metric system is usually the base row and will control more little numerals, while the imperial system is usually the top row and includes bigger numerals.
For extra confirmation, you can also approximate for letter labels that express “cm” or “meter”/”m” since those are metric measurements.
- Not every measuring tape will possess letter markings, but they may encounter on the far left if it accomplishes.
- If you only detect 1 row of markings, attempt converting the tape measurement across. The other side may include more additional measurement markings.
- If you can solely notice imperial measurements or “inch” and “feet”/”ft” labels, you would like to get an additional measuring tape.
How to Read a Tape Measure in mm?
Metric Tape Measure features 10 marks to the centimeter.
The slightest marks on a tape demonstrate one millimeter or 1/10th of a centimeter.
he spacious, bold markings on a metric tape measure implementation centimeters. The symbolic mark in the center signifies a half-centimeter.
- Find the nearest centimeter to the endpoint to read a metric measuring tape. Examine the remaining indicator lines to notice how multiple millimeters are excess.
- Count those to the entire centimeters utilizing a decimal. For instance, represent you calculate 20 whole centimeters, and there are 6-millimeter marks rejected over. Your absolute measurement will be 20.6 centimeters.
How to Read a Tape Measure in Cm?
Centimeters are the next sub-unit guiding up to the meter. They are numerous and numbered markings on the metric row.
You will detect a scarcely more extended line midway between the centimeter makings.
This line symbolizes the half centimeter, which is completed of 5 millimeters.
It is more illustrative than the other millimeter lines but more straightforward than the centimeter lines. It is also not usually tagged.
- For illustration, you should notice a slightly longer line between “3” and “4.” This stands for 3 and 5 millimeters, giving you 3.5 centimeters.
Parts of a Tape Measure
Here, the below of parts of a measuring tape are as follows.
1. Use of the Tape Lock
Practically all tape dimensions contain a lock that will maintain the tape measure from recoiling.
That is reasonable if you require to bring tension off of the tape measure or to set the tape measure down while it is applied.
On this Stanley Fat Max model, the slide lock is the big black button on the top.
Sliding this down will lock the tape unrestricted to manage recoil. As an Amazon Associate, we may receive charges for authorizing investments from Amazon.
2. Use of the Sliding Hook
A signature component of tape importance is the hook on the rear of the tape.
That promotes a double pursuit of retaining the tape from rolling into the case and authorizing hooking onto the end of measured items.
You might notice that the rear hook decreases or locomotes just a while.
That is by procedure to account for the thickness of the hook, which privileges the tape measure to be accurate when hooking onto a thickness and when butting the behind up to a cover.
Be conscious of tape efforts that do not have a sliding hook, as they will not be as authentic.
3. Use of the Framing Stud Hints
Most tape measurements contain red markings at precise intermissions: 16″, 32″, 48″, 64″, and so on.
These numerals are significant because they demonstrate the middle of a stud for 16″ on center scaffolding.
Some tape measures furthermore feature black diamond insignia intermissions that are 19.2″ asunder.
These diamonds also proclaim framing intermissions for a more exhaustive stud or joist spacing.
4. Use of the Nail Grab
The hook on a tape measure continuously has an undersized hole or groove.
That qualifies to hook the hook on a nail or screw, so it doesn’t glide off when assembling long measurements.
That is useful for more elongate measurements, such as measuring across a room or patio length.
The oval cutout is hooked onto a nail or screw on the overhead hook.
5. Use the Sides of the Hook
Some tape measurements, expressly framing tapes, have large hooks that can grip externals on the side of the hook.
Utilizing these can enhance the hook’s gripping capability and enhance the accurateness of measurements since the tape standard will not mandate wrestling to read the markings.
How to Choose the Right Tape Measure?
Many tape standards are on the market, coordinating to very different objectives.
When selecting the correct one for you, assume what you’ll be utilizing, how long you mandate it, and how much you’d select to disburse.
When preferring a tape measure, assess the following elements to discover the right tape measure for you and your necessities.
- Size and alleviation of reading the markings
- Imperial or metric markings
- Length of the tape
- The physical size of the tape
- Standout length for measuring longer lengths
- Locking features
Notice our examination of the best tape measures to find which tape measure we encountered to be the best and for examinations on several conducting tape measures.
You can print a tape measure in a fraction to maintain a journey to the store.