West Point Bridge Designer

What Is West Point Bridge Designer?

West point bridge designer software for designing of the bridge. Bridge Design Contest is to provide middle school and high school students with a realistic, engaging introduction to engineering. They are providing this contest as a service to education.

The Bridge Designer 2016 is a free educational software package designed for introduction to engineering through the design of a steel highway bridge.  To install the Bridge Designer, download and run the appropriate setup file below.

The West Point Bridge Design Contest is a nationwide Internet-based competition intended to promote math, science, and technology education in U.S. middle schools and high schools.

The contest provides students with a realistic introduction to engineering through engaging, hands-on design experience.

The West Point Bridge Designer will introduce you to engineering through authentic, hands-on design experience. Official software used to enter the West Point Bridge Design Contest.

This software provides you with the tools to model, test, and optimize a steel highway bridge, based on realistic specifications, constraints, and performance criteria.

Your objective is to create an optimal bridge design. An optimal design is one that satisfies all of the design specifications, passes a simulated load test, and costs as little as possible.

Also, read: Difference Between Bitumen and Tar | What Is Bitumen | What Is Tar

Reuierd System for Run Softwer.

Over View of West Point Bridge Designer

The Bridge Designer is a free educational software package designed to provide middle-school and high-school students with a realistic introduction to engineering through the design of a steel highway bridge.

The Bridge Designer has the look and feel of an industry-standard computer-aided design (CAD) package but is much easier to use. The software guides the user through the processes of:

• Displaying a 3-d animation of the load test, with members color-coded to indicate tension (blue) and compression (red).

• Graphically modifying the design to strengthen any inadequately designed members.

• Minimizing the cost of the design, by adjusting member properties or modifying the geometry of the structure.

• Graphically creating a structural model.

• Defining the material and mechanical properties of each member in the structure and.

• Running a simulated load test of the structure to determine if it is strong enough to carry a standard, code-specified highway loading.

The Bridge Designer’s integral simulation, animation, and real-time cost calculation features enhance learning by providing on-demand feedback.

With a single button click, the user can determine if the design is successful (i.e., if it passes the load test) and if it is optimal (i.e., if its cost is as low as possible).

Creating a successful design is simple, but creating an optimal design is quite challenging. Thus, the software offers an engineering design experience that is achievable by kids as young as a fourth grade but still suitable for technologically savvy high school and college students.

Also, read: Properties of Stones | Requirements of Good Building Stones

How to Make a Bridge in this Software?

There are ten different sample bridges provided by the Bridge Designer.

If you load a sample of a bridge you choose which one you want from the list, but if you start a new bridge it automatically goes to a suspension bridge, 44 meters:

It always starts like this but if you don’t want the Members window you can click on the x, and it disappears:

But if you want it back you just click on the little arrow in the top right-hand corner and it reappears:

I usually x it. This is a demonstration of a bridge on the Bridge Designer:

You start with your joints:

Then the members:

At any time you can check your bridge with the truck by pressing.

This is what this bridge looks like:

At the moment it sags a little but you can put in reinforcements to make it stronger. Put a row of joints under the first one:

Then add the members:

Now it’s flatter again:

That’s one of the many ways to make a bridge with the Bridge Designer.

Suspension Bridge (44-meter span)

There are three different types of suspension bridges in the Bridge Designer. The first one on the list is a 44-meter span bridge. If you want to load a sample of a suspension bridge it looks like this:

and you can always start with your own design by pressing start a new bridge.

Again, you start with your joints:

Then members:

Then try out your bridge:

That’s a Suspension Bridge 44-meter span.

Features

Have fun testing and improving your designs with your friends.

Design a virtual bridge and compete nationally for scholarships or a computer!

Learn about engineering and design.

Teachers, school districts, states! Run your own local contest with our support.

Cool game quality animation of bridge test with Open GL.

BD (since 2013) is code-signed for your computer’s safety and Windows 10 and Mac 13.0 security compliance!